Table of Contents
Advertisement
Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the touchpad.
2. Install the
power-adapter
3. Install the
display
assembly.
4. Install the
system
board.
5. Install the speakers.
6. Install the
4-cell battery
7. Install the
base
cover.
8. Follow the procedure in
Power button with fingerprint reader
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
4-cell battery
4. Remove the speakers.
5. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
6. Remove the
display
assembly.
7. Remove the
power-adapter
About this task
The following image indicates the location of power-adapter port and provides a visual representation of the removal procedure.
46
Disassembly and reassembly
port.
or the
3-cell
battery.
After working inside your
Before working inside your
or the
3-cell
battery.
port.
computer.
computer.
Advertisement
Table of Contents
