Touchpad; Removing The Touchpad - Dell Vostro 5301 Service Manual

Steps
1. Place the display assembly on a clean surface.
2. Align and place the palm-rest and keyboard assembly at an angle with the display assembly.
3. Align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly.
4. Replace the screw (M2x2) that secures the right hinge to the system board and the palm-rest and keyboard assembly.
5. Replace the two screws (M2x2) that secure the left hinge to the palm-rest and keyboard assembly.
6. Lift the mylar that covers the display-cable connector on the system board.
7. Connect the display cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Touchpad

Removing the touchpad

Prerequisites
1. Follow the procedure in
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 31