Installing The 2280 Solid-State Drive - Dell Vostro 5301 Service Manual

CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the base cover.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Lift the protective tape that covers the 2280 solid-state drive slot.
2. Peel the Mylar that covers the 2280 solid-state drive.
3. Remove the screw (M2x3) that secures the 2280 solid-state drive to the system board.
4. Slide and remove the 2280 solid-state drive from the solid-state drive slot.

Installing the 2280 solid-state drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
20 Disassembly and reassembly