Icom HM-184UL Instructions page 2

USING THE MICROPHONE
Microphone
[PTT]
Speaker
Turn OFF the transceiver before attaching or
detaching the microphone.
NOTE:
• NEVER immerse the connector in water. If the connector
becomes wet, BE SURE to dry it before attaching to the
transceiver.
• To maximize the readability of your transmitted audio, hold
the microphone approximately 5 to 10 cm (2 to 4 inches)
from your mouth, and then speak at your normal voice
level.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Belt clip
To attach:
Attach the connector of the speaker microphone to the multi
connector on the transceiver and tighten the screw.
Turn OFF
– 2 –
Screw
Coin
CAUTION: Firmly attach to the multi
connector, but do not overtighten. A loose
connection will allow water intrusion into the
connector. Over-tightening the connection
can damage the transceiver.
A7546W-1EX
Aug. 2019
Printed in Japan
© 2019 Icom Inc.