ziva SlimTouch Manual page 16

Parts of the machine
A) Vacuum opening: air is sucked out of the vacuum chamber through this opening. Prevent
moisture or food from being sucked into this opening and the vacuum bag from covering this
opening during operation.
B) Gasket: this gasket ensures a vacuum can be created and maintained. If the gasket is
damaged them machine will not function correctly.
C) Seal strip: below this Teflon strip is a 2,5mm metal strip that will become very hot in order to
weld/seal the bag.
Risk of burns!
This seal strip will become very hot during sealing and can cause burns when touched
after opening the lid. Please be careful when handling the machine with an open lid
directly after sealing.
D) Vacuum chamber: the open end of the vacuum bags must be placed in this chamber to
ensure correct functioning of the machine.
E) Release button: open the lid by pressing this button on the right side of the machine.
F) Seal rubber: this rubber strip ensures a smooth and flat surface of the welded seal.
15