Download Print this page

Advertisement

Quick Links

DEAR CUSTOMER
Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set
the standard for quality, durability and ease of assembly.
If for any reason you feel we haven't lived up to the high standards we set ourselves,
please don't hesitate in contacting us on 08451 656565 where our team will be very
keen to understand what has gone wrong and, more importantly, put it right.
DEAR CUSTOMER
The next step...
There is no need to feel daunted by the number of parts and ttings in front of you, we have
compiled this straight forward, step-by-step guide to make sure that assembling your furniture
is as easy as 1, 2, 3.
Before you begin, we advise that you check that you have everything you need to get started.
TOP TIP
Find a space to spread these out across the oor before you begin
assembling them. Lay each panel down in position, ready to build.
It is recommended that two people assemble this product together.
The full list of furniture parts, xtures and ttings, as well as the tools you will need for assembly,
can be found on pages 2, 3 and 4 of this manual.
TOP TIP
Identify all of the ttings, make sure that you have them all prepared
and familiarise yourself with each component, to make things easier
when you are putting it all together.
Safety and Care Advice
IMPORTANT - The rst step you need to take is to ensure your safety!
Please take the time to read and understand these instructions before assembling your
furniture.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
Make sure that you allow enough space to move around when assembling your furniture.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 30149781 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dunelm 30149781

  • Page 1 DEAR CUSTOMER Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.
  • Page 2 Parts & Fittings for Soho TV Bench (30149781 / 30149736) Panel - exploded view Panels - plan view Top panel(103x40cm) Bottom panel(103x40cm) Left side panel Right side panel Divider panel (36x39.9cm) (36x39.9cm) (36x36cm)
  • Page 3 Shelfx2 (48.1x36cm) Left drawer front Right drawer front (48.5x17.7cm) (48.5x17.7cm) Left drawer side x2 Right drawer side x2 Drawer back panelx2 (35x14cm) (35x14cm) (43x14cm) Drawer bottom x2 Back panel (98.7x37cm) (44x34.8cm) Fittings 30mm Connecting bolt x14 67mm Connecting bolt x2 15mm Locking cam x18 Cap x6 8mm Wooden dowel x20...
  • Page 4: Tools Required

    18mm Screw x6 Rear panel connector x6 Allen key x1 Leg x4 350mm Runner x4 Tools required Cross slot screwdiver Hammer Tape measure The use of power tools to assemble the product is not recommended due to the risk of over tightening xings .
  • Page 5 Note: Recommend putting panel on carpet to avoid scratch. Note: Recommend putting panel on carpet to avoid scratch. Slot Outlet Fully insert locking cams on the boards, Screw connecting the slot always points bolts as far as shown to the outlet of holes. Do not over tighten.
  • Page 6 Slot Outlet Fully insert locking cams on the boards, Note: Recommend putting panel the slot always points to the outlet of holes. on carpet to avoid scratch. Note: Recommend putting panel on carpet to avoid scratch. Slot Outlet Fully insert locking cams on the boards, the slot always points to the outlet of holes.
  • Page 7 Note: Recommend putting panel on carpet to avoid scratch. Note: Recommend putting panel on carpet to avoid scratch. Note: Recommend putting panel on carpet to avoid scratch.
  • Page 8 Note: Recommend putting panel on carpet to avoid scratch. Front edge Note: Recommend putting panel on carpet to avoid scratch. Front edge...
  • Page 9 Screw connecting bolts as far as shown Do not over tighten.
  • Page 10 Screw connecting Note: Recommend putting panel bolts as far as shown on carpet to avoid scratch. Do not over tighten.
  • Page 11 Note: Maintain the cabinet...
  • Page 12 Screw connecting bolts as far as shown Do not over tighten.
  • Page 13 Nearly There! Note: If the gaps between drawers need to be adjusted, you can change the screw hole positions on slides as illustrated and adjust the drawers.
  • Page 14: Care And Maintenance

    From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. Finally, we hope you enjoy your furniture for many years to come and thanks again for your purchase. dunelm.com...

This manual is also suitable for:

30149736