Download Print this page

Dunelm Ontario 30149680 Manual

2 drawer bedside

Advertisement

Quick Links

DEAR CUSTOMER
Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set
the standard for quality, durability and ease of assembly.
If for any reason you feel we haven't lived up to the high standards we set ourselves,
please don't hesitate in contacting us on 08451 656565 where our team will be very
keen to understand what has gone wrong and, more importantly, put it right.
DEAR CUSTOMER
The next step...
There is no need to feel daunted by the number of parts and
compiled this straight forward, step-by-step guide to make sure that assembling your furniture
is as easy as 1, 2, 3.
Before you begin, we advise that you check that you have everything you need to get started.
TOP TIP
Find a space to spread these out acr
assembling them. Lay each panel down in position, ready to build.
It is recommended that two people assemble this product together.
The full list of furniture parts,
can be found on page 2 and 3 of this manual.
TOP TIP
and familiarise yourself with each component, to make things easier
when you are putting it all together.
Safety and Care Advice
IMPORTANT
Please take the time to read and understand these instructions before assembling your
furniture.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials way from children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
Make sure that you allow enough space to move around when assembling your furniture.
res and
as well as the tools you will need for assembly,
re that you have them all prepared
in front of you, we have
re you begin
re your safety!

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ontario 30149680 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dunelm Ontario 30149680

  • Page 1 DEAR CUSTOMER Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.
  • Page 2 Parts & Fittings for the Ontario 2 Drawer Bedside (30149680) Panel - exploded view Panels - plan view Left side panel Right side panel 335 x 482mm 335 x 482mm Left front leg Left rear leg Right front leg Right rear leg 60 x 513mm 60 x 513mm 60 x 513mm...
  • Page 3: Tools Required

    Fittings 40mm Screw 30mm Wooden dowel 50mm Wooden dowel Metal cam pin Metal cam x 12 x 24 x 24 14mm Screw Handle Drawer track Drawer slide 22mm Handle screw x 32 Foot glide Plastic corner 16mm Screw Tools required Cross slot screwdriver Hammer Tape measure...
  • Page 4 Note: Insert metal dowels as far as shown.
  • Page 5 Front edge This end to the front edge of the panel Front edge Ensure the cam is pressed fully into the hole and arrow pointing towards to the edge...
  • Page 6 Fit the panels together with help Ensure the cam is pressed fully into the hole and arrow pointing towards the top edge Ensure the cam is pressed fully into the hole and arrow pointing towards the edge...
  • Page 7 This end to the front end Note: Insert metal of the panel dowels as far as shown. Front end Front end...
  • Page 8 Ensure the cam is pressed fully into the hole and arrow pointing towards the edge Nearly There! Fit both drawer slides into drawer tracks straight and evenly, not tilting to one side. Please make sure both left and right slides are engaged at the same time.
  • Page 10: Care And Maintenance

    From time to time check that there are no loose screws on this unit. This product should not be discarded with household waste. Take to your local authority waste disposal centre. Finally, we hope you enjoy your furniture for many years to come and thanks again for your purchase. dunelm.com...