Mounting The Lens Cover; Moving The Projector - Canon LV-S2 Owner's Manual

PREPARATION
When transporting the projector or when it is not used for an
extended period of time, attach the Lens Cover.
Before attaching the Lens Cover, be sure to turn the projector off
and disconnect the AC Power cord from the AC outlet.
1 Secure the Strap for the Lens Cover through the hole.
2 Turn the projector upside down and secure the Strap for the
Lens Cover to the bottom of projector with a screw.
When moving a projector, attach the Lens Cover and retract the Adjustable Feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it into the case (carrying bag) supplied with the projector.
CAUTION
Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed
to protect the projector from external forces. Do not transport a projector through a courier or transport services with this bag,
otherwise the projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put
other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
G Do not drop or bump a projector, otherwise damage or malfunction may result.
G When carrying a projector, use a suitable carrying case.
G Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, consult your dealer.
10

MOUNTING THE LENS COVER

MOVING THE PROJECTOR

LENS COVER
STRAP FOR LENS COVER
Secure to the hole with a screw.