Connecting The Md Walkman To Your Computer - Sony Walkman MZ-N520 Operating Instructions Manual

Connecting the MD Walkman to your computer

After the software installation is completed, connect the MD Walkman to your computer.
1
Insert a recordable disc into the MD Walkman.
2
Make the power source and connect the MD Walkman to the computer using
the supplied dedicated USB cable.
AC power
adaptor
To the DC IN jack
3
Check the connections.
When the connections have been properly made, "PCppMD"* appears in the display
of the MD Walkman.
Depending on the MD Walkman, "Net MD" may be displayed.
Note
When using the MD Walkman connected to your computer, it is recommended that you run the recorder
from an AC outlet. If you use a battery to run the MD Walkman, be sure to use a new dry cell or a fully
charged rechargeable battery. We do not assure the results should there be a mis-operation, transferring
failure, or destruction of audio data caused by insufficient battery power.
To the USB jack/ dedicated jack
MD
Walkman
Dedicated USB cable
To the USB
connecting terminal
Computer
73