Others - Sony Walkman MZ-N520 Operating Instructions Manual

Net md walkman supplied with new sonicstage 2.0 software
Hide thumbs Also See for Walkman MZ-N520:
Table of Contents

Advertisement

Others

Symptom
The recorder does
not work or works
poorly.
The recorder will
not play.
62
Cause/Remedy
• The rechargeable battery is not charged.
, Charge the rechargeable battery.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on ("HOLD" appears in the display
when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to
the opposite direction of the arrow.
• The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
, Take the MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
• The rechargeable battery or dry battery is weak ("LoBATT"
flashes or nothing appears).
, Charge the rechargeable battery or replace the dry battery with
the new one, or connect the supplied AC power adaptor to the
recorder.
• The dry battery have been inserted incorrectly.
, Insert the battery correctly.
• The disc is damaged or does not contain proper recording or
editing data.
, Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
• While operating, the recorder received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
• A Hi-MD disc or a standard disc in Hi-MD mode is inserted.
, Hi-MD discs or standard discs in Hi-MD mode cannot be
played on this recorder.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents