Safety - IPS Controllers M720 Owner's Manual

M720 pH/ORP Controller Owner's Manual
IMPORTANT SAFETY INSTRUCTIONS
B.
READ AND FOLLOW ALL
1.
INSTRUCTIONS
2. Risk of electric shock: Connect the controller to a dedicated
ground-fault circuit interrupter (GFCI) circuit breaker.
3. Disconnect power before servicing the controller.
4. Inspect all power cords frequently. Any damaged cords should
be replaced immediately to reduce the risk of injury by shock.
5. Always maintain a record of manual water chemistry readings
using an accurate test kit.
WARNING
6.
permit children to use this product unless they are closely
supervised at all times.
7. Danger — Risk of injury.
a. Replace damaged cord immediately.
b. Do not bury cord.
c. Connect to a grounded, grounding type receptacle only.
WARNING
8.
5 feet (1.5m) from inside wall of water enclosure using non-
metallic plumbing.
9. Operation of this controller without a functioning flow-switch
will void the NSF Certification.
WARNING
10.
accessible to the public.
SAVE THESE INSTRUCTIONS
11.
.
— To reduce the risk of injury, do not
— Risk of electric shock. Install at least
— Do not install this controller where it is
3
.