Grease - Komatsu WB142-5 Shop Manual

GENERAL

GREASE

Lubrication Points
Articulations, grease fittings
Note 1:For axle oil, use only the recommended oil as follows.
SHELL:
CALTEX:
CHEVRON:
TEXACO:
MOBIL:
Note 2: The recommended lubricating grease is No.2 multi-purpose lithium grease with 3% molybdenum disulfide
(Lithio EP + MoS2).
FUEL AND ENGINE OIL REMARKS
• When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic maintenance hours described in this
manual. Change oil according to the following table if fuel sulphur content is above 0.5%.
• When starting the engine in an atmospheric temperature of lower than 0°C (32°F), be sure to use engine oil of SAE10W,
SAE20W-20 and SAE10W-30, even though an atmospheric temperature goes up to 10°C (18°F) more or less in the day
time.
• Use API classification CI-4.
• There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 10W-40), but be sure to add single
grade oil that matches the temperature in the table.
• Use Komatsu genuine oil which has been specifically formulated and approved for use in the engine, hydraulic work
equipment, transmission, axles, and brakes.
Specified capacity: Total amount of oil including oil for components and oil in piping.
Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance.
ASTM: American Society of Testing and Material
SAE: Society of Automotive Engineers
API: American Petroleum Institute
01-8 3
DONAX TD
RPM TRACTOR HYDRAULIC FLUID
TRACTOR HYDRAULIC FLUID
TEXTRAN TDH OIL
MOBILFLUID 422 or 424
Fuel sulphur content
0.5 to 1.0%
Above 1.0%
FUEL, COOLANT, AND LUBRICANTS
Consistency
NLGI 2
Change interval of oil in engine
oil pan
1/2 of regular interval
1/4 of regular interval
Type
(See note 2)
WB142-5