Velocity Bookcase 900 High VBC99 Assembly Instructions

Bookcase

Download this manual

Assembly Instructions

Velocity Bookcase

900 High

2 CARTONS

NOTE: The Velocity Bookcase converts to a Storage Cupboard by adding doors

(box 3). If you have ordered a Storage Cupboard additional instructions and

hardware are located in box 3.

MANUFACTURER CODE: VBC99

OW CODES: CPVELBCWH, CPVELBC90B,

CPVELBCGB, CPVELBCGR, CPVELBC90W

manufactured by designtec

www.designtec.com.au

1 / 5

Page 1 Assembly Instructions Velocity Bookcase 900 High 2 CARTONS NOTE: The Velocity Bookcase converts to a Storage Cupboard by adding doors (box 3). If you have ordered a Storage Cupboard additional instructions and hardware are located in box 3. MANUFACTURER CODE: VBC99...
Page 2: Tools Required For Assembly
NOTE Please check you have all hardware before assembling. If you are missing any hardware, please contact the store of purchase. Please ensure you have the name of the item, required hardware part and quantity. Please retain your receipt as proof of purchase to validate your warranty. CAUTION Do not tighten screws before all screws are in the right place.
Page 3 STEP 1 Unscrew the two part foot to separate PART (A) from PART (B). Fix PART (A) of two part foot to the bookcase base using SCREW (D). PART (B) of the two part foot can now be attached to PART (A) by placing it on top and rotating clockwise.
Page 4: Back Panel
STEP 3 Fix ten (10) PINS (C) into back panel as shown below. NOTE: all pre-drilled holes for the PINS (C) are offset to the edge of the panel. Ensure to leave all central pre-drilled holes empty. BACK PANEL STEP 4 Attach the end panels to the LH END back panel by aligning the...
Page 5 STEP 6 Take your bookcase base and align with the back, top and sides of your bookcase. Place eight (8) CONFIRMAT SCREWS (E) through the pre-drilled holes on the underside of the base. Using your screw driver, tighten all CONFIRMAT SCREWS (E) until base is secure.