Related Manuals for Velocity Workstation
Summary of Contents for Velocity Workstation
- Page 1 WORKSTATION 1800L X 1800L X 750D X 720H Hardware Enclosed: CAM PRE-INSERTED INTO BOARD Note: Hardware is distributed over 3 boxes Manufacturing Company Only...
- Page 2 LH RETURN...
- Page 3 ALIGN SIDE (A) WITH MODESTY (B), PUSH TOGETHER AND TIGHTEN TIGHTENING SCREW IN CAMS ENSURING THAT THE HOLE S ON THE SIDE (A) OF THE MODESTY (B) ARE FACING INWARDS ALIGN TOP (C) WITH ASSEMBLED SIDE (A) AND MODESTY (B), PUSH TOGETHER AND TIGHTEN TIGHTENING SCREW IN CAMS PLACE ITEM (3) OVER TOP AND USE 4 X ITEM (4) TO SECURE TO TOP (C)
- Page 4 RH RETURN...
- Page 5 ALIGN SIDE (A) WITH MODESTY (B), PUSH TOGETHER AND TIGHTEN TIGHTENING SCREW IN CAMS ENSURING THAT THE HOLE S ON THE SIDE (A) OF THE MODESTY (B) ARE FACING INWARDS ALIGN TOP (C) WITH ASSEMBLED SIDE (A) AND MODESTY (B), PUSH TOGETHER AND TIGHTEN TIGHTENING SCREW IN CAMS PLACE ITEM (3) OVER TOP AND USE 4 X ITEM (4) TO SECURE TO TOP (C)
- Page 6 W/S ASSEMBLY...
- Page 7 ALIGN ASSEMBLED ABOVE COMPONENTS OVER THE TOP (D) ENSURING PINS LINE UP WITH CAMS PUSH IN PLACE AND TIGHTEN TIGHTENING SCREW UNTIL SECURE SCREW ITEM 2 INTO PRE-BORED ENDS FOR HEIGHT ADJUSTMENT ONCE ENTIRE WORKSTATION IS ASSEMBLED FINE ADJUST LEVELLING FEET TO SUIT YOUR REQUIREMENTS...
- Page 8 TIGHTEN TIGHTENING SCREW UNTIL SECURE. HIGHLIGHTED IN CIRCLES USE 4 X ITEM 4 AND FASTEN SECURELY TO THE LOCATING HOLES ON THE ON THE CENTRAL PORTION OF THE WORKSTATION PLACE WORKSTATION IN CORRECT POSITION AND LEVEL AS REQUIRED USING ADJUSTABLE FEET ON ALL LEGS...