DeWalt DCR017 Manual page 6

Hide thumbs Also See for DCR017:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
*Date code 201811475B or later
**Date code 201536 or later
English
Batteries
Cat #
V
DC
DCB546
18/54
DCB547
18/54
DCB548
18/54
DCB181
18
DCB182
18
DCB183/B
18
DCB184/B
18
DCB185
18
DCB187
18
DCB189
18
DCB141
14.4
DCB142
14.4
DCB143
14.4
DCB144
14.4
DCB145
14.4
DCB125
12
DCB127
12
*Date code 201811475B or later
**Date code 201536 or later
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to Technical Data).
Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.

WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.

CAUTION: Burn hazard. To reduce the risk of injury,
charge only D
WALT rechargeable batteries. Other types of
e
batteries may burst causing personal injury and damage.

CAUTION: Children should be supervised to ensure that
they do not play with the appliance.
NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
4
Weight
DCB104
DCB107
Ah
kg
6.0/2.0
1.05
60
270
9.0/3.0
1.46
75*
420
12.0/4.0
1.44
120
540
1.5
0.35
22
70
4.0
0.61
60/40**
185
2.0
0.40
30
90
5.0
0.62
75/50**
240
1.3
0.35
22
60
3.0
0.54
45
140
4.0
0.54
60
185
1.5
0.30
22
70
4.0
0.54
60
185
2.0
0.30
30
90
5.0
0.52
75
240
1.3
0.30
22
60
1.3
0.20
22
60
2.0
0.20
30
90
; the maximum length
2
Chargers/Charge Times (Minutes)
DCB112
DCB113
DCB115
DCB118
170
140
90
270
220
135*
350
300
180
45
35
22
120
100
60
60/40**
60
50
30
150
120
75
75/50**
40
30
22
90
70
45
120
100
60
45
35
22
120
100
60
60
50
30
150
120
75
40
30
22
40
30
22
60
50
30
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean
DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual. The charger
and battery pack are specifically designed to work together.
These chargers are not intended for any uses other than
charging D
WALT rechargeable batteries. Any other uses
e
may result in risk of fire, electric shock or electrocution.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting
charger. This will reduce risk of damage to electric plug
and cord.
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
Do not use an extension cord unless it is absolutely
necessary. Use of improper extension cord could result in risk
of fire,electric shock, or electrocution.
Do not place any object on top of charger or place
the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.
Place the charger in a position away from any heat source. The
charger is ventilated through slots in the top and the bottom
of the housing.
Do not operate charger with damaged cord or plug—
have them replaced immediately.
DCB132
DCB119
60
90
X
75*
135*
X
120
180
X
22
22
45
60
120
30
30
60
75
150
22
22
X
45
45
90
60
60
120
X
22
45
X
60
120
X
30
60
X
75
150
X
22
40
X
22
40
X
30
60

Advertisement

Table of Contents
loading

Table of Contents