New Holland SmartTrax T8.320 Service Manual page 77

Engine - Install
Prior operation:
Engine - Remove (10.001)
1. If removed, install the front engine mounting brackets
(1).
2. Torque the four mounting bolts (2) to 101 - 113 N·m (75
- 83 lb ft).
3. Torque the ISO mount support bolt nut (3) to 160 -
220 N·m (118 - 162 lb ft).
4. Install the right (shown) and left rear engine ISO
mounts.
5. Properly support the engine. Raise and move the en-
gine into the front support frame.
6. Install the front engine mounting nut.
Engine - Engine and crankcase
47917988 24/09/2015
10.1 [10.001] / 50
1
RCPH10CCH833AAB
2
RCPH07CCH166AAB
3
RAIL13TR04248AA
4
RAIL13TR04246AA