New Holland SmartTrax T8.320 Service Manual page 68

Hide thumbs Also See for SmartTrax T8.320:

Table of Contents

Engine - Remove

Prior operation:

Disconnect the batteries — Battery - Disconnect (55.302)

Prior operation:

Remove the hood — Hood - Remove (90.100)

Prior operation:

Side shield - Remove (90.102)

Prior operation:

Recover the refrigerant — Air conditioning - Recover (50.200)

Prior operation:

Drain the coolant — Engine cooling system - Emptying (10.400)

Prior operation:

Engine cooling system - Remove (10.400)

Prior operation:

Diesel Oxidation Catalyst (DOC) - Remove (10.500)

NOTE: Clean all fittings before disconnecting.

NOTE: Cap or plug all lines and ports when disconnecting hydraulic components.

1. Disconnect the harness connector to the humidity sen-

sor (1) and the air restriction sensor (2). Disengage the

hose clamp (3) and disconnect the hose from the air in-

take tube.

2. Disconnect the clamps (1) from each end of the air

intake tube and remove the tube.

Engine - Engine and crankcase

47917988 24/09/2015

10.1 [10.001] / 41

RAIL13TR04202AA

RAIL13TR04211AA

Table of Contents