Nokia 3650 User Manual page 27

Options during a call
Many options that you can use during a call are network services. Press
a call for some of the following options:
Mute or Unmute, End active call,
Drop participant, Answer, and Reject.
Swap is used to switch between the active call and the call on hold.
Transfer is used to connect an incoming call or a call on hold with an active call and to
disconnect yourself from both calls.
Send DTMF is used to send DTMF tone strings, for example, passwords or bank account
numbers.
Glossary:DTMF tones are the tones you hear when you press the number keys on
the phone keypad. DTMF tones allow you to communicate with voice mailboxes
and computerised telephony systems, for example.
1
Key in the digits with
transmitted while the call is active. Press
pause of approximately two seconds before, or between DTMF characters.), and w (if
you use this character, the remaining sequence is not sent until you press
during the call). Press
2 To send the tone, press OK.
Tip! You can also store a sequence of DTMF tones for a contact card. When you
make a call to the contact, you can retrieve the sequence. Add DTMF tones to the
phone number or DTMF
End all calls, Hold or Unhold,
- . Each keystroke generates a DTMF tone, which is
repeatedly to produce: *, p (inserts a
to produce #.
fields in a contact card.
Options during
New call, Conference, Private,
Send again
Fig. 3 Options during a
call.