Nokia 3650 User Manual page 150

Glossary: Pairing
means authentication. The
users of the Bluetooth-
enabled devices should
agree together what the
passcode is, and use the
same passcode for both
devices in order to pair
them. Devices that do not
have a user interface have
a factory-set passcode.
Icons for different
Bluetooth devices:
- Computer,
- Phone,
- Other, and
- Unknown.
5
Pairing (if not required by the other device, go to step 6)
• If the other device requires pairing before data can be transmitted, a tone sounds
and you are asked to enter a passcode.
•
Create your own passcode (1-16 characters long, numeric) and agree with the
owner of the other Bluetooth device to use the same code. This passcode is used
only once and you do not have to memorise it.
• After pairing, the device is saved to the Paired devices view.
6
When the connection has been successfully established, the note
shown.
Note: Data received via Bluetooth can be found in the Inbox folder in Messaging.
See p. 93 for further information.
Note: If sending fails, the message or data will be deleted. The Drafts folder in
Messaging does not store messages sent via Bluetooth.
Checking the status of the Bluetooth connection
• When is shown in standby mode, Bluetooth is active.
• When is blinking, your phone is trying to connect to the other device.
• When is shown continuously, the Bluetooth connection is active.
Paired devices view
Pairing with a device makes device searches easier and quicker. Paired devices are easier
to recognise, they are indicated by
view, press to open a list of paired devices (
in the search result list. In the Bluetooth main
).
Sending data is