Table of Contents
Advertisement
1. Attach the Upright Posts
1-1. Attach the Left Upright Post
•
Ask some one to help you hold the
Left Upright Post Assembly (3) in front of
the Left side Main Frame (1) closely.
•
Attach the Left Upright Post (3) to the
front end of the left side Main Frame (1)
with four M8 x 55mm Allen Head Bolt (78)
with finger tight in position firstly.
1-2. Attach the Right Upright Post
•
Ask someone to help you hold the Right Upright Post Assembly (2) in
front of the right side Main Frame (1) closely.
•
Hook the inner tension cable together as shown ( you may have to pull
the outer tension cable firmly, to hook the upper cable into the bracket
of the lower cable)
Connect the Middle Section Wires ( 2 pins & 3 pins ) (58.1 / 58.2)
•
and Sensor Wires ( 2 pins & 3 pins ) (61/60) together accordingly and
tightly.
•
Slide the rest of the connect wires & tension cables into
the Right Upright Post (2) firstly and then attach the Right Upright
Post (2) to the front end of the right side Main Frame (1) with
four M8 x 55mm Allen Head Bolt (78) with finger tight
in position firstly.
!
Take Care to ensure
the wires & cables are
connected as tightly as
possible, Slide the rest of
the connect wires & cables
into the right upright post
before the Right Upright
Post attachment.
6
4.
3.
2.
Tension
Cable
FIXINGS:
FIXINGS:
Part
No.
78
4
x
FIXINGS:
TOOLS:
FIXINGS:
FIXINGS:
Part
No.
78
4
x
FIXINGS:
TOOLS:
1.
Advertisement
Table of Contents
