Set The Date And Time Format; What Is Standby Mode; Check The Signal Strength; Switch Your Handset On/Off - Philips CD360 User Manual

Set the date and time format

1
Press menu.
2
Select [CLOCK & ALARM] > [SET
FORMAT], then press [OK] to confirm.
3
Select [DATE FORMAT] or [TIME
FORMAT].
4
Select the setting. Select [DD/MM][MM/
DD] as the date display and [12 HOURS]
or [24 HOURS] as the time display. Then
press [OK] to confirm.
»
The setting is saved.

What is standby mode?

Your phone is in standby mode when it is idle.
The standby screen displays the handset name,
handset number, date and time, signal icon, and
battery icon.

Check the signal strength

• The signal icon displays the link status
between the handset and base station.
A steady icon means your handset and
the base station are linked. A flashing icon
means your handset and the base station
are not linked.
• Ensure the handset is linked to the base
station before you make or receive calls
and carry out the phone functions and
features.
• If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
All manuals and user guides at all-guides.com

Switch your handset On/Off

• Press and hold
handset. The handset's screen turns off.
Note
•
When the handset is switched off, no call can
be received.
• Press and hold
handset. It takes a few seconds for the
handset to power up.
to switch off the
to switch on the
EN 15