Check The Battery Level; Set The Date And Time; Set The Date And Time Format - Philips SE360 User Manual

Note
• Charge the batteries for 24 hours before first
use.
Warning
•
Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
a The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b Place the handset on the base station to
power up.
If the handset becomes warm when the
batteries are being charged, it is normal.
16 EN
All manuals and user guides at all-guides.com

Check the battery level

The battery icon displays the current battery
level.
The battery is full, the talk time
can go up to 14 hours.
The battery is empty. Charge it.
The handsets turn off if the battery is empty. If
you are on the phone, you hear warning tones
when the battery is almost empty. The call gets
disconnected after the warning.

Set the date and time

1
Press menu.
2
Select [CLOCK & ALARM] > [SET
DATE/TIME], then press [OK] to
confirm.
3
Press the numeric buttons to enter the
date, then press [OK] to confirm.
»
On the handset, the time set menu is
displayed.
4
Press the numeric buttons to enter the
time.
• If the time is in 12-hour format, press
Ph.Book
/ to select [AM] or [PM].
call ID
5
Press [OK] to confirm.

Set the date and time format

1
Press menu.
2
Select [CLOCK & ALARM] > [SET
FORMAT], then press [OK] to confirm.
3
Select [DATE FORMAT] or [TIME
FORMAT].
4
Select the setting. Select [DD/MM][MM/
DD] as the date display and [12 HOURS]
or [24 HOURS] as the time display. Then
press [OK] to confirm.
»
The setting is saved.