Philips CD360 User Manual page 37

Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
»
The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when the outgoing message
starts playing.
3
Enter your PIN code.
»
You now have access to your
answering machine, and the new
messages start playing.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
•
When no message plays, the phone hangs up
automatically if no key is pressed for 8 seconds.
All manuals and user guides at all-guides.com
Remote access commands
Key Function
1 Repeat current or play
previous message.
2 Play messages.
3 Skip to next message.
6 Delete current message.
7 Switch answering machine on
(not available during playback).
8 Stop message playback
9 Switch answering machine off
(not available during playback).
EN 37