Parts And Controls - Sony Walkman NWZ-A826 Quick Start Manual

Parts and Controls

Front

BACK/HOME button*
1
Press to go up one list screen level, or to
return to the previous menu. Press and hold
the BACK/HOME button to display the
Home menu (  page 10).

Headphone jack
For connecting the headphones. Insert the
jack pin until it clicks into place.

WM-PORT jack
Use this jack to connect the supplied USB
cable, or optional peripheral devices.


5-way button
Press the  button to start playback. Press
the  button to confirm after selecting an
item with the /// button.
 (play/pause/confirm) button*
2
/ buttons
/ buttons

Display

Bluetooth antenna (aerial)

Bluetooth indicator
Indicates the status of the Bluetooth function.

VOL +* /– button
2
Rear

BLUETOOTH button
Press and hold to turn on or off the
Bluetooth function, and to establish or to
end Bluetooth connection.

HOLD switch
By sliding the HOLD switch to the direction
of the arrow , all operation buttons are
disabled.

OPTION/PWR OFF button*
1
Displays the option menu. If you press and
hold the OPTION/PWR OFF button, screen
turns off and the player enters standby
mode. If the standby mode is retained for
about a day, the player turns off completely
automatically (  page 13).

Strap hole
Used to attach a strap (sold separately). You
can attach the supplied stand and a strap at
the same time (  page 7).

RESET button
Resets the player when you press the RESET
button with a small pin, etc.

Accessory hole (type I)
Used to attach the supplied stand or the
optional accessories.
* 1 Functions marked with on the player
are activated if you press and hold the
corresponding buttons.
* There are tactile dots. Use them to help with
2
button operations.