Table of Contents
Advertisement
SA-VK61DEE
Item
Condition and Key
Jitter display
While the player is
stopped and no disc is
inserted,
hold down the
button on the player
and
button,
remote controller unit.
Error code display
While the player is
stopped and no disc is
inserted,
hold down the
button on the player
and
button,
remote controller unit.
Measurement of laser
While the player is
current
electricity
stopped and no disc is
initialization value
inserted,
hold down the
button on the player
and the
on
controller unit.
Measurement of DVD
While the player is
laser current electricity
stopped and no disc is
inserted,
hold down the
button on the player
and
button on the remote
controller unit.
ADSC internal RAM
While the player is
display
stopped and no disc is
inserted,
hold down the
button on the player
and the number button
"1" or "2" on the remote
controller unit.
All manuals and user guides at all-guides.com
Operational
Function
Jitter display
Measures
and
press
and
Measurement
second. Read error counter starts at 0
at the mode setting, and increased by
the
number
one as data read fails at target block. A
"5"
on
the
small defect is allowed to correct by
retry. Any possibility is counted as one
increment. Repetitive errors after retry
increase by two levels or more.
Error code display
Displays the latest error code stored in
press
and
EEPROM.
the
number
"0"
on
the
Measurement
electricity initialization value
press
and
Memorizes each initialization value of
DVD and CD in EEPROM.
button
the
remote
Measurement of DVD laser current
electricity
press
and
Measures DVD laser current electricity
and displays the result together with
the
initialization
the
DISPLAY
EEPROM. After measurement, DVD
laser is lit till the power is turned off (or
goes off when the primary power is
turned off).
ADSC internal RAM display
Reads and displays the RAM value
press
and
inside ADSC. The address is renewed
when the CLEAR key is pressed so
that the values at eleven points appear.
Details
*1
*2
J
xxx
_yyy
displays
jitter.
*1
is
repeated
every
: Jitter display mode
*2
: Jitter measurement value
*3
: Read error counter
*4
: Focus driving value
Values are shown to one decimal
place in the decimal digit.Focus
driving value is displayed in the
hexadecimal digit.
DVDnn_F---
*nn: Error history
*--: Error number
DVD 01 FOBF
*1
of
laser
current
LDO
_013
*1
: Laser current electricity
measurement mode
*2
: DVD current electricity value
*3
: CD current electricity value
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is 13mA at DVD
laser and 32mA at CD laser when
laser is turned on.
*1
LDD
_012
*1
: DVD laser current electricity
measurement mode
*2
value
stored
in
: Current electricity initialization
value stored in EEPROM
*3
: Present value of current
electricity
Values are shown in the decimal
digit. The above example indicates
that the current electricity
initialization value is 12mA and its
present value is 14mA.
*1
*2
A
_FB0
*1
:ADSC internal RAM display
mode
*2
: Address
*3
: RAM value at displayed
address
Values are shown in the
hexadecimal digit. The above
example indicates that ADSC
value at the address, FB0h is
0000h.
26
Display
TO Exit Mode
*3
*4
_zz
Press the STOP or
OPEN button.
Press the OPEN
button.
*2
*3
_032
Automatically exits
the mode after five
seconds.
*2
*3
_014
Automatically exits
the mode after five
seconds.
*3
_0000
Press the STOP or
OPEN button.
Advertisement
Table of Contents
