Komatsu WB156PS-5 Shop Manual page 24

FOREWORD
★ Type 3
1. Disconnection
A. Hold the tightening portion and push body (9) straight
until sliding prevention ring (8) touches contact surface
(b) of the hexagonal portion at the male end (Fig. 10).
B. While holding the condition of Step A, push cover (10)
straight until it contacts surface (b) of the hexagonal por-
tion at the male end (Fig. 11).
C. While holding the condition of Steps A and B, pull out
whole body (9) to disconnect it (Fig. 12).
2. Connection
• Hold the tightening portion and push body (9) straight
until the sliding prevention ring contacts surface (b) of
the hexagonal portion at the male end (Fig. 13).
00-18
b
CONNECTING PUSH-PULL TYPE COUPLER
WB156PS-5