Connecting Other Devices - Sony NW-HD5 Instruction & Operation Manual

Connecting Other Devices

You can listen to tracks through a stereo system and record tracks in the
player onto a MiniDisc or a cassette tape. See the instruction manual that
comes with the device you want to connect.
Be sure to turn off all devices before making the connections and changing
the settings and explained below.
MiniDisc recorder,
AV amplifier,
active speaker,
cassette recorder,
etc.
You need to change the setting for "Audio Output" in the Options display
to output sound to the connected device. The settings of " Audio Output"
are shown below. To make those settings, see  page 51.
Connected device
Headphones
Device connected using
the connecting cord
When you connect another device, set this to "Line Out." When the setting
is "Line Out," volume cannot be adjusted, and the settings in "Sound" is
not available and do not work.
Notes
• When the supplied headphone is connected to the player, do not set "Audio
Output" to "Line Out." If it is set to "Line Out," the volume cannot be
adjusted and the sound will be distorted and noisy.
• Before playback, turn down the volume of the connected device to avoid
damaging the connected speaker.
Left (white)
to (headphones)/
LINE OUT jack
Right (red)
Connecting cord
(minijack, not
supplied)
Setting
Headphone
Line Out
58
GB