New Holland SmartTrax T8.320 Service Manual page 30

*Front axle reduction ratio – T8.380 and T8.410
Class 4.75 fixed and saddle suspended
Class 5.0 and class 5.0 wide fixed and saddle suspended
* This ratio number can be found on the axle serial number plate.
*Front axle reduction ratio – T8.435
Class 5.0 wide fixed and saddle suspended and class 5.0
* This ratio number can be found on the axle serial number plate.
*Front axle reduction ratio – T8.380, T8.410 and T8.435 SmartTrax™
Class 5.0 fixed and suspended and class 5.0 wide
* This ratio number can be found on the axle serial number plate.
Park brake system
Park brake
Power steering
Type
Steering pump
Steering cylinder
Remote hydraulic system
Pump
Type remote valve
Standard remote system * – All models
Optional MegaFlow remote system* – All models
System pressure - standard
System pressure - MegaFlow
Couplings
*System flow at 2000 RPM
Rear Power Take-Off (PTO)
Power Take-Off (PTO) type
Clutch type
Rotation
Output shaft size (if equipped)
Engine speed for 540 RPM and 1000 RPM
PTO
PTO overspeed warning 540 RPM and
1000 RPM PTO
INTRODUCTION
540 RPM
1000 RPM
1000 RPM
48123737 21/04/2017
1.32716
1.32204
1.32454
1.34927
actuated by transmission control lever
Priority on demand from axial piston pump
all sections load check "B" port (raise)
variable flow control for each section
6 splines, 34.9 mm (1.375 in) diameter PTO shaft
21 splines, 34.9 mm (1.375 in) diameter PTO shaft
20 splines, 44.5 mm (1.75 in) diameter PTO shaft
23
Spring applied multiple disc
Hydrostatic type
Double action cylinder
Axial piston pump, pressure
and flow compensated
Closed center,
and "A" port (lower)
166 l/min (44 US gpm)
282 l/min (75 US gpm)
21000 kPa (3045 psi)
21000 kPa (3045 psi)
ISO and ASAE/ASABE compatible
fast removal break away type
Independent of transmission
Hydraulic actuated
Clockwise from rear of tractor
621 RPM/ 1150 RPM PTO
*21.500
*21.583
*21.583
*21.583
1803 RPM