FIG. 3: The illustration shows the bale that is almost
finished. The belt tensioning rolls have moved upward, to
increase the size of the bale chamber.
The bale is being supported by the carrier roll, the tailgate
carrier roll (1), the filler plate, and the forming belts.
The bale must now be wrapped with twine and unloaded.
Tailgate Cylinder Stops
FIG. 4: When the tailgate is raised for any maintenance
or service work, install both tailgate cylinder stops (1) to
prevent the tailgate from being lowered. The tailgate can
only be lowered when the tailgate cylinder stops are
removed.
FIG. 5: Make sure both tailgate cylinder stops are
removed and in the storage position (1) before lowering
the tailgate. Lowering the tailgate with one tailgate
cylinder stop installed can twist the tailgate frame and
cause belt tracking problems.
4283412M1
FIG. 3
FIG. 4
FIG. 5
Find manuals at https://best-manuals.com
General Information
1
1
1
L94A-0156
74RB-01H16
73RB-01H05
01-5