Safety Alert Symbol; Safety Messages; Informational Messages - MASSEY FERGUSON MF1734 Service Manual

General Information
FIG. 14: The twine knife is actuated through the pull rod
(1) by the twine arm (2) when the twine arm returns the
home position.
There is one twine guide rod mounted inside of the
right-hand side of the baler to put the twine properly on
the right-hand end of the bale. Limit of arm travel to the
left-hand side of the baler puts twine properly on the
left-hand end of the bale. See the Operation section for
twine threading.

SAFETY ALERT SYMBOL

FIG. 15: The safety alert symbol means ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED!
Look for the safety alert symbol both in this manual and
on safety signs on this machine. The safety alert symbol
will direct your attention to information that involves your
safety and the safety of others.

SAFETY MESSAGES

FIG. 16: The words DANGER, WARNING or CAUTION
are used with the safety alert symbol. Learn to recognize
these safety alerts and follow the recommended
precautions and safety practices.
m
DANGER: Indicates
hazardous situation that, if not avoided, will
result in DEATH OR VERY SERIOUS
INJURY.
m
WARNING: Indicates
hazardous situation that, if not avoided,
could result in DEATH OR SERIOUS
INJURY.
m
CAUTION: Indicates
potentially hazardous situation that, if not
avoided, may result in MINOR INJURY.

INFORMATIONAL MESSAGES

The words IMPORTANT and NOTE are not related to
personal safety, but are used to give additional
information and tips for operating or servicing this
equipment.
01-10
FIG. 14
FIG. 15
an imminently
a potentially
FIG. 16
a
1
4283412M1
2
73RB-01H19a
Saf
WC1957