Sony TRINITRON KV-DA322M64 Service Manual page 218

continued
Symptom
No color
Picture slant
Abnormal color
patches
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches on
and off or is
distorted.
The wide screen
mode changes
spontaneously
when "Auto Wide"
is "On".
The 1 (standby)
indicator on your
TV flashes red
several times after
every three
seconds.
The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
36
Additional Information
• Display the "Picture" menu and select "Custom" from "Picture Mode", then
adjust the "Color" level from "Picture Adjustment" (see page 23).
• Display the "Setup" menu and check the "Color System" setting
(usually set this to "Auto") (see page 31).
• Check the antenna setup. Contact a Sony dealer for advice.
• Keep external speakers or other electrical equipment away from the TV.
• Display the "Picture Position" under "Setup" menu, then adjust "Picture
Rotation" and "Picture V-Position" so that the picture is aligned to the TV
screen (see page 30).
• Keep external speakers or other equipment away from the TV. Do not
move the TV while the TV is turned on. Press ! (main power) on the TV
to turn off the TV for about 15 minutes, then turn it on again to
demagnetize the TV.
• Check the antenna cable and connection on the TV, VCR and at the wall
(see page 32).
• Check the antenna setup. Contact a Sony dealer for advice.
• During a transition between two programs, the TV detects the optimum wide
screen mode. During this period, an irregular wide screen mode may appear.
• The wide screen mode is switched automatically according to the received
signal with an ID-1 or WSS signal.
• The Auto Wide feature stops working temporarily when you have pressed
, and functions again when the signal format changes. To fix in the
manually selected wide screen mode, set "Auto Wide" to "Off" in the
"Wide Screen" menu (see page 26).
• Count the number of times the 1 (standby) indicator flashes.
Press ! (main power) to turn off your TV. Contact your nearest Sony
service center.
• The "Signal Booster" is functioning to detect a weak signal. This doesnot
indicate a malfunction.
Solutions