Circuit Adjustments; Adjustments With Commander - Sony TRINITRON KV-DA322M64 Service Manual

6-1.

ADJUSTMENTS WITH COMMANDER

Service adjustments to this model can be performed using the supplied remote commander RM-GA001.
a. ENTERING SERVICE MODE
With the unit on standby
t [DISPLAY] t 5 t [VOL $+% ] t [POWER]
This operation sequence puts the unit into service mode.
This screen display is:
item no.
category in decimal
WHBL 000
software
release ID version
CGA01 0.16M
S_ _ : for SONY
A_ _ : for AIWA
L_ _ : BX1L Full
B_ _ : BX1L Basic
D_ _ : DVD Combo
C_ _ : CX1
Z_ _ : Sound special
_ _ _01 : Serial no. of the M/P release for each
destination
_ _ _10 ~: use for FY04 BX1
_ _SB : Sub Hercules
b. METHOD OF CANCELLATION FROM SERVICE MODE
Set the standby condition (Press [POWER] button on the commander), then press [POWER] button again, hereupon it becomes
TV mode.
c. METHOD OF WRITE INTO MEMORY
1. Set to Service Mode.
2. Press 1 (UP) and 4 (DOWN), to select the adjustment item.
3. Change item by pressing 3, 6.
4. Press [MUTING] button to indicate WRITE on the screen.
5. Press - button to write into memory.
1, 4 Select the adjustment item.
r
3, 6 Raise/lower the data value.
r
[MUTING]
Writes.
r
- Executes the writing.
SECTION 6

CIRCUIT ADJUSTMENTS

service data
item name in decimal
WBP 000
service data reserved
in binary for factory
0000 0000
For BP1 Board Version; and PF Engine Version;
BP1 Board Version
PF Engine Version
NVM service
NG command
x SERVICE
color system
FF FF NTSC3
Category and release ID will be different.
The rest are the same.
item no.
category in decimal
SUBP 000
software
release ID version
CBP01 0.06
item no.
category in decimal
9090 000
software
release ID version
PF 0018M
– 15 –
KV-DA322M64/M66
field channel no./
frequency video input name
50 S VIDEO 1
power on time
(decimal)
00100
item
name
IDXH
item
name
UOF
RM-GA001