Siemens MKB-1 Operating Instructions Manual page 17

Viewing Security Conditions To see the security condition list when there are more than eight security conditions,
How to Individually Acknowledge a Security Condition (UL 1076)
Siemens Building Technologies
Fire Safety
In addition, the System responds to security conditions with programmed output
functions.
In Figure 8, 1-001 represents the address of the device reporting the security condi-
tion. 002 on Line 14 in the More Info area (Lines 13-15) tells you that this is the
second (and the most recent) of two security conditions received.
The status information shown in Line 10 reports the total number of alarms,
supervisories, troubles, and security conditions.
If your System includes a printer, it prints a message from two to four lines long
similar to the following:
SECURITY IN 1-1 11:59:59 DEC 31, 20
#2 [custom message], [device type]
In the above printed message, SECURITY indicates that the type of occurrence is a
security condition; 1-1 is the device address; #2 is the number of the security
condition in the list of security conditions; [custom message] is a custom message
entered using the CSG-M Custom Software Generator (See the CSG-M Programming
Manual, P/N 315-090381); [device type] is the type of device which reported the
security condition.
press the DOWN key on the MKB. If your system is set for Canada, it displays the
oldest event first.
• The first, unACKnowledged, security condition will be placed on line nine of
the display. Press SEC ACK. The System acknowledges the trouble displayed
and then places the second, unACKowledged security condition in line nine
(the fixed line). If your System has the printer option, it prints an acknowl-
edgment message similar to the following:
ACK Security
#2 [custom message], [device type]
Note that the acknowledgment message includes the term ACK to indicate
this security condition was acknowledged.
• Continue acknowledging security conditions as explained above until the
System displays the following message:
ALL SECURITY CONDITIONS ACKNOWLEDGED
The SECURITY LED glows steadily to indicate that all security conditions are
acknowledged, and the internal audible goes silent.
• If your System includes a printer, it prints the following message:
ACK Security
All Security Conditions Are Now Acknowledged.
1-5 12:01:28 Dec 31,20
12:05:44 DEC 31, 20
17 P/N 315-048692-2