Adjusting The Handle - Kayoba 003150 Operating Instructions Manual

ADJUSTING THE HANDLE

1. Release the adjuster knob for the handle (7).
2. Adjust the handle to the required height,
align the hole and tighten the knob.
USE
• The display shows the training parameters:
odometer (not all models), time, speed,
distance and calories (not all models).
• Use the MODE button to select which
training parameters to show.
FUNCTIONS
Start
Press the button to start the training computer
and to show the parameters for the last
session.
Scanning
1. Press the button to show all the
parameters in order.
2. Press the MODE button until SCAN is shown
on the bottom right. The training computer
browses through the parameters time,
speed, distance and calories and shows
each parameter for 4 seconds.
Time
Press the MODE button until TMR is shown
on the display to show the session time. The
time when the exercising machine is idle is not
counted.
Speed
Press the MODE button until SPD is shown
on the display to show the actual speed. Unit
km/h.
Distance
Press the MODE button until DIST is shown on
the display to show the actual distance. Unit
km.
Calories
Press the MODE button until CAL is shown on
the display to show the number of burned
calories. Unit kcal.
Reset
Press the MODE button for 3 seconds to reset
the displayed parameters.
Automatic switching off
The training computer switches off if no speed
signal is received for 4 minutes.
EN
23