Download Print this page

Frama MATRIX F22 Operating Manual

Tax meter

Hide thumbs Also See for MATRIX F22:

MATRIX F22 / F42 – TAX METER

Operating manual

Please refer to the Full Operating Manual of Franking System Matrix F series for FramaOnline2

installation, installing ink-jet cassette and credit loading.

The below mentioned functions are specific for TaxMeter application only.

Start menu overview

Two start menus are available to you for efficient stamping:

Your Frama Matrix TaxMeter has already been pre-programmed with the

most important stamp values.

Press the OneTouch key for the stamp value required. The product is set

and you can stamp the item as soon as the Ready display appears.

Press a different OneTouch key to change the value.

Each of the OneTouch keys can be reassigned to suit your needs. Press

the OneTouch key you wish to change twice, change the value and press

OK to save the modified value to the OneTouch key.

Stamp values can also be entered independently by using the numeric

keypad instead of OneTouch.

Call up the Numeric keypad by pressing the value on top.

Enter the stamp value required using the keypad. Confirm the value by

pressing OK. You can stamp the item as soon as the Ready display

appears.

Table of Contents

Do you have a question about the MATRIX F22 and is the answer not in the manual?

Page 1 Start menu overview Two start menus are available to you for efficient stamping: OneTouch Your Frama Matrix TaxMeter has already been pre-programmed with the most important stamp values. Press the OneTouch key for the stamp value required. The product is set and you can stamp the item as soon as the Ready display appears.
Page 2 Message Your Frama Matrix TaxMeter is pre-programmed with the official “Cayman Islands Government Stamp Duty” message, which has to be activated. Select it as follows: 1. To choose the message, press the „i“ key in the Start Menu to call up the Main Menu.

Matrix f42