Advertisement
PAIRING
Spark 4K sets (TX and RX), are paired by default, requiring no additional configuration. Spark 4K
devices purchased separately need to be paired using Launchpad, or the Launchpad App.
NOTE: Before starting any pairing process, ensure that both the transmitter and receiver have the
same firmware version and have Bluetooth enabled.
PAIRING VIA LAUNCHPAD (DESKTOP)
Connect both the transmitter and receiver(s) to your computer (Windows/Mac) via USB.
1
Open Launchpad, click the Pairing tab, then tap the Wired Pairing button.
2
Select the devices you want to pair, then click the Pair Devices button. Launchpad will indicate whether
3
or not Pairing is successful.
PAIRING VIA THE LAUNCHPAD APP
Open the Launchpad App from your iOS or Android device, then tap the Pairing button.
1
Select the transmitter you wish to pair, then tap the Next button.
2
Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Launchpad
3
App will indicate when the pairing process is completed.
11 6
Advertisement
