Sony CDX-GT710 Basic Operations page 2

SET UP CD
Setting the clock Display items for CD
The clock uses a 24-hour digital indication.
Press .
1
2
Rotate the volume control dial until
"Clock Adjust" appears, then press
.
The clock adjustment display appears.
3
Rotate the volume control dial to set
 Source (CD/ATRAC/WMA/MP3/AAC)
the hour and minute.
To move the digital indication, press 
indication
 Clock
+/–.
 Track/album/group number, disc/artist/album/
4
After setting the minute, press
group/track name, Elapsed playing time,
.
information
The clock starts.
* Album/group number is displayed only when the
Tip
album/group is changed.
You can set the clock automatically with the RDS feature.
For details, see "Adjusting setup items" on this sheet,
To change display items , press ;
and set to "CT on" (Clock Time).
scroll display items , press  on the
card remote commander or set "Auto Scroll on."
RADIO
CD
Storing stations automatically
Repeat and shuffl e play
— BTM
The unit selects strong signal stations and stores
1 During playback, press  (REP)
them. You can store up to 6 stations per band or  (SHUF) repeatedly until the
(FM1, FM2, FM3, MW, or LW).
desired setting appears.
Caution
Select
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Repeat Track
1 Press  repeatedly until Repeat Album*
"TUNER" appears.
Repeat Group*
To change the band, press 
Shuffl e Album*
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
Shuffl e Group*
2 Press .
Shuffl e Disc
3
Rotate the volume control dial until
"BTM" appears, then press .
*1 When an MP3/WMA/AAC is played.
*2 When an ATRAC CD is played.
The unit stores stations in order of frequency
on the number buttons.
To return to normal play mode, select "Repeat
A beep sounds when the setting is stored.
off" or "Shuffl e off."
SET UP RADIO CD
Adjusting the sound
characteristics
1 Press .
2
Rotate the volume control dial until
the desired menu item appears, then
press .
3
Rotate the volume control dial to
select the setting, then press .
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set:
" " indicates the default settings.

EQ3 parametric
To select an equalizer type: "Xplod," "Vocal,"
"Edge," "Cruise," "Space," "Gravity," "Custom"
or "off" ( ).

DSO
To select the DSO mode: "1," "2," "3" or "off"
( ). The larger the number, the more enhanced

the effect.
Balance
To adjust the balance between the right and left
speakers: "R10" – "0" (
Fader
To adjust the balance between the front and rear
To play
speakers: "F10" – "0" (
track repeatedly.
Subwoofer
To adjust the subwoofer volume: "+10" – "0"
1 album repeatedly.
( ) – "–10"

2
group repeatedly.
( "– " is displayed at the lowest setting.)
1 album in random order.
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
2
group in random order.
( ), "125Hz" or "78Hz."

disc in random order.
AUX Level*
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources.
Adjustable level: "+18 dB" – "0 dB" (
"–8 dB"
* When AUX source is activated.
USB SET UP RADIO CD USB
Adjusting setup items
— MENU
1 Press .
2
Rotate the volume control dial until
the desired menu item appears, then
press .
3
Rotate the volume control dial to
select the setting, then press .
The setting is complete.
Press .
4
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set:
" " indicates the default settings.

Setup
Clock Adjust
To set the clock.
CT (Clock Time)
To set "on" or "off" ( ).

Beep
To set "on" ( ) or "off."

RM (Rotary Commander)
) – "L10"

To change the operative direction of the rotary
commander controls.
– "NORM" (  ): to use the rotary commander in
the factory-set position.
) – "R10"

– "REV": When you mount the rotary
commander on the right side of the steering
column.
Auto Off
To shut off automatically after a desired time
when the unit is turned off: "NO" (

"30 min" or "60 min."
) –

Display
Auto Image
To set various display images.
– "All": to step repeatedly through the display
images in all display modes.
– "Movie" ( ): to display a movie.

– "SA": to display the Spectrum analyzer.
– "off": to not display any image.
Info (Information)
To display the items (depending on the source, etc.).
– "Simple" ( ): to not display any items.

– "All": to display all items.
– "Clear": to have items automatically
disappear.
Demo* 1 (Demonstration)
To set "on" (  ) or "off."
Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically

when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Illumination
To change the illumination color: "Blue" (  ) or
"Red."
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "on" ( ): to scroll.

– "off": to not scroll.
Receive Mode
Local (Local Seek Mode)
– "off" ( ): to tune normal reception.

– "on": to only tune into stations with stronger
signals.
Mono* 2
(Monaural Mode)
To improve poor FM reception, select monaural
), "30 Sec,"
reception mode.
– "off" ( ): to hear stereo broadcast in stereo.

– "on": to hear stereo broadcast in monaural.
Regional* 2
To set "on" ( ) or "off."

BTM
To store radio stations automatically.
*1 When the unit is turned off.
*2 When FM is received.
Location of controls and basic operations /
Detaching the front panel