Page 1
• Socket Wrench • Socket extension, Recommended Please read the mounting instructions below Thank you for purchasing your new CB Mount from JcrOffroad! Checkout our website, www.jcroffroad.com for more deals and carefully before attempting to install. other great off-road products. Be sure to rate and review our prod- uct online.
Page 2
Note: The photos here are of a ’97-’01 but the install is the same on ’84-’96 XJ’s. The only difference is the bolts are in slightly different locations. Using the 10mm Socket, remove the two top mounting bolts from your tail light housings. Loosen the remaining bolts.
Page 3
Using the 10mm Socket again, screw back in the two bolts that you removed until tight, and tighten the lower bolt. Follow the install instructions included with your CB Antenna for installing the antenna to our mount.