Download Print this page

Troubleshooting; Maintenance; Environment Protection - Sealey CH20 Quick Start Manual

2000w/2800w industrial ceramic fan heater

Advertisement

5. TROUBLESHOOTING

Fault Description
Fan heater does not operate.
Tilt safety switch is activated.
Fan does not operate.
Fan heater does not warm up.

6. MAINTENANCE

WARNING! Disconnect the fan heater from the mains and allow the fan heater to fully cool before attempting any cleaning or
maintenance.
6.1.
Clean the fan heater with a moist cloth and a mild detergent.
DO NOT use solvents to clean the fan heater.
6.2.
Use a vacuum cleaner on the outside grille to clean dust from internal parts.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Check power supply/fuse.
Check that the fan heater is on a flat, level surface.
Turn the heat selector dial to FAN. Turn the thermostat control dial to MAX.
Turn the thermostat control dial to MAX.
Turn the heat selector dial to the Low or High power heating position.
01284 703534
sales@sealey.co.uk
Original Language Version
Suggested Solution
www.sealey.co.uk
CH20,CH28 Issue 1 12/04/21

Advertisement

loading

This manual is also suitable for:

Ch28