Related Manuals for Feider Machines FMP1250
Summary of Contents for Feider Machines FMP1250
- Page 1 Original instructions ROTARY HAMMER FMP1250 READ THESE INSTRUCTIONS BEFORE USE THE TOOL BUILDER SAS 32, rue Aristide Bergès -ZI 31270 Cugnaux –France Made in PRC...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 SECURE WORKPIECE. Use clamps or a vice to hold the work when practical. It is safer than using your hand and it frees both hands to operate the tool. MAKE SURE there are no nails or foreign objects in the part of the workpiece to be cut ...
- Page 5 THE PRODUCT Rotary switch and locking button SDS chuck Auxiliary handle Rear handle Trigger switch Rotary switch and percussion stop Lubrication oil tank CARTON CONTENTS ROTARY HAMMER DESCRIPTION ROTARY HAMMER Chisels Drill bits Tube of lubrication oil Carry case Anti-dust cover Depth stop...
-
Page 6: Specifications Techniques
WARNING AVAILABLE ACCESSORIES Use only accessories recommended for this electric hammer. Follow instructions that accompany accessories. Use of improper accessories may cause injury to the operator or damage to the hammer. Do not use any accessory unless you have completely read the instructions or Owner’s Manual for that accessory. - Page 7 Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another; The declared vibration total value may also be used in a preliminary assessment ...
- Page 8 Function selection Choose the function according the operation to do by using the function buttons (part 1 and 6 on the drawing of description). For the function button localized on the top of the tool, push the lock button and then turn the knob to the desired position For the function button which is on the rear of the tool, turn the scroll wheel on the left or on the right to select the function.
- Page 9 4/ When working at a high level, always make sure that no person or persons are below you, as this could invite injuries to those persons under you. 5/ Before starting any job like breaking, chipping a wall, floor or ceiling, thoroughly confirm that no items such as an electric cable, water pipe or conduit are buried inside as this could cause injury or flooding.
- Page 10 CAUTION Sometimes the tool does not begin the striking stroke even when the motor rotates this may be because the oil has become thick Due to low temperature or has been standing idle for long period. Run the chisel for approx.
- Page 11 Maintenance and inspection 1. Inspecting the tool When using dull tool bits this can cause motor malfunction and degraded efficiency. Always replace dull bits with new ones without delay when abrasion is noted. 2. Inspecting the mounting screws Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately.
- Page 12 GENERAL When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloth to remove dirt, dust, oil, grease etc.
- Page 13 BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below: Rotary Hammer Model: FMP1250 Serial number: 20211001723-20211002223 Complies with the provisions of the Directive “machinery” 2006/42/CE and national laws transposing it: Also complies with the following European directives:...
-
Page 14: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor. -
Page 15: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the FMP1250 and is the answer not in the manual?
Questions and answers