Advertisement
Quick Links
OVERVIEW
This wireless temperature sensor may be used as a room remote temperature sensor or an outdoor temperature sensor.
When used as an outdoor sensor it must be kept out of direct rain and sunlight.
Venstar thermostats vary by model in the way they can use remote sensors. This includes averaging, control to, or monitoring features.
Please consult the Owner's Manual of the thermostat that you are going to pair this sensor with to understand its capabilities.
This sensor is compatible with Venstar VenNet thermostats that contain the latest firmware.
If you are wanting to pair this sensor to a thermostat other than what is depicted in these instructions,
please scan the QR code or look on venstar.com/support/accessories/vennet-temp-hum-sensor-support/
for pairing instructions and a list all compatible thermostats.
SPECIFICATIONS
Temperature Measurement Range:
-40°F - 130°F
Humidity Measurement Range:
0 – 100% RH
Note: Extended extreme temperatures may have a negative impact on range and battery life.
TO PAIR THIS VenNet SENSOR TO A THERMOSTAT:
1. Make sure a fully charged CR2450 battery is installed in the
sensor as shown in Fig. 1.
How to remove
the sensor cover
Wireless Temperature/Humidity Sensor
Temperature Sample rate
Once a minute
Expected Battery Life - Type CR2450
•
Remote Sensor sample rate of 1per minute: > 1 year
fig. 1
model:
Installation Instructions
TO PAIR:
1. REMOVE THIS TAB.
2. HOLD SENSOR NEAR
STAT, PRESS
BUTTON
FOR 2 SECONDS.
3. FOLLOW THE
Before initial use pull this
INSTRUCTIONS
ON STAT.
mylar tab out from under
the battery
PULL BACK TO
REMOVE BATTERY
PRY HERE WITH
FINGER TO REMOVE
BATTERY
ACC-VNTH1
Use phone camera
for more info
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Venstar VENnet ACC-VNTH1
Summary of Contents for Venstar VENnet ACC-VNTH1
- Page 1 When used as an outdoor sensor it must be kept out of direct rain and sunlight. Venstar thermostats vary by model in the way they can use remote sensors. This includes averaging, control to, or monitoring features. Please consult the Owner’s Manual of the thermostat that you are going to pair this sensor with to understand its capabilities.
- Page 2 2. Press and hold the Pair Button on the sensor for 1 second, Fig. 2. a. Upon release of the Pair button the red led will flash slowly. b. The sensor will remain in its pairing state for 1 minute. 3.
- Page 3 INDOOR SENSOR MOUNTING CONSIDERATIONS: • The sensor must be mounted within communication range of the thermostat it is paired to - Typically, the range is 250 feet in “clear air” with no obstructions such as walls - The range will be reduced by walls, furniture, appliances, and other obstructions •...
- Page 4 équivalente (PIRE) ne est pas plus de ce qui est nécessaire pour une communication réussie. We, Venstar, declare under our sole responsibility that the device to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the VENnet ACC-VNTH1 and is the answer not in the manual?
Questions and answers