1. Manuals
  2. Brands
  3. Trust Manuals
  4. PCI Card
  5. 100MB
  6. Quick start manual

Trust 100MB Quick Start Manual

Speedshare pci card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1

Introduction

Congratulations on your purchase of the Trust 100MB Speedshare PCI Card. The
Trust 100MB Speedshare PCI card allows you to connect your PC to a Local Access
Network (LAN) and/or broadband internet connection
2

Safety

Please read the following directions before first use.
1.
Always disconnect the power supply and remove the power supply cable
before opening your computer and installing any device.
2.
Never attempt the repair the product yourself. All repairs should be done by a
qualified individual.
This product conforms to relevant European directives and standards. The
Declaration of Conformity (DoC) can be found at www.trust.com/13512/ce.
3

Installation

1.
Ensure that your PC is turned off and the power supply cable has been
unplugged.
2.
Remove your PC cover.
3.
Firmly insert the Card into a free PCI slot on the motherboard.
4.
Install a bracket screw securing the card to your PC case.
5.
Replace your PC cover
6.
Reconnect the power supply cable and start your PC.
Note: Do not try to insert a standard telephone cable into the RJ-45 port as this may
damage your Trust 100MB Speedshare PCI Card.
4

Driver Installation

Please ensure that you follow the correct instructions for your version of Windows.
The procedure is not the same for each Windows version.
Driver location and name

Windows 98

CD-ROM
CD-ROM
Table 1: Driver descriptions
4.1
Windows 98
1.
Turn on your computer.
TRUST 100MB SPEEDSHARE PCI CARD
\driver\Win98
\driver\WinMe
Automatic Detection
Automatic Detection
1
U K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 100MB and is the answer not in the manual?

Questions and answers

Related Manuals for Trust 100MB

Summary of Contents for Trust 100MB

  • Page 1 TRUST 100MB SPEEDSHARE PCI CARD Introduction Congratulations on your purchase of the Trust 100MB Speedshare PCI Card. The Trust 100MB Speedshare PCI card allows you to connect your PC to a Local Access Network (LAN) and/or broadband internet connection Safety Please read the following directions before first use.
  • Page 2 If a yellow exclamation mark or a red X is showing next to the network adapter device the driver needs to be reinstalled, see 4.1. Locate the Trust 100MB Speedshare PCI Card in the hardware list and right click, select properties.
  • Page 3 If a yellow exclamation mark or a red X is showing next to the network adapter device the driver needs to be reinstalled, see 4.2.. Locate the Trust 100MB Speedshare PCI Card in the hardware list and right click, select properties.
  • Page 4 If a yellow exclamation mark or a red X is showing next to the network adapter device the driver needs to be reinstalled, see 4.4. Locate the Trust 100MB Speedshare PCI Card in the hardware list and right click, select properties.
  • Page 5 TRUST 100MB SPEEDSHARE PCI CARD TCP/IP Setup In most cases The TCP/IP setting will be set at “Obtain an IP address automatically” in some situations you will need to set the IP address manually. Windows 98/ME To change the IP settings please follow: Click Start then select Settings and then choose Control Panel.
  • Page 6 TRUST 100MB SPEEDSHARE PCI CARD Troubleshooting Problem Cause Possible solution No network The Ethernet cable is not Ensure the Ethernet cable correctly inserted in the is inserted properly into communication. adapter. the adapter, if this does not work replace the Ethernet cable.
  • Page 7 For further Networking Information please read the “Networking Sharing Manual”. You can find this manual on the Trust installer CD that came with the product. To open this manual click on “Read manual” on theTrust installer CD menu, or see the file named “Read Internet Sharing Manual”...

Table of Contents