Table of Contents
Advertisement
Alignment Settings
(The figures used below are nominal and used for representative purposes only)
Please Note
When aligning the TV, in Service Mode 1, please remember that separate alignments need to be performed in both PAL (50Hz) and NTSC
(60Hz) systems for 4:3 , FULL and JUST aspect modes.
Alignment Function
Vertical amplitude
Vertical linearity
V-Pos.
Horizontal amplitude
Horizontal position
EW-amplitude
EW-amplitude
Trapezium-comp
Vert. DC.
Text Position
Cutoff
Cutoff RGB
White RGB
Sub Brightness
V-AMP
038
V-LIN
022
V-POS
005
H-AMP
043
H-POS
035
E/W-AMP 1
020
E/W-AMP 2
015
TRAPEZ-1
004
VERT. D.C.
008
TEXT POSITION
060
- - -
CUTOFF RGB
032 032 032
WHITE RGB
032 032 032
SUB BRIGHT
000
Settings / Special features
Optimum setting
Optimum setting
Optimum setting
Optimum setting
Optimum setting
Optimum setting
Select a Greyscale pattern enter Service
Mode and step through to Cutoff, connect an
oscilloscope to the Blue Cathode and adjust
the screen VR of the FBT to get 150_5V at
the base of the Cutoff pulse.
Press the GREEN button to step through the
settings. Adjust for optimum.
Press the GREEN button to step through the
settings. Adjust for optimum.
Optimum setting
5
Advertisement
Table of Contents
