Download Print this page

Hogtunes Wild Boar Audio WBA LC LWR ADA Installation Manual

Liquid cooled lower speaker adaptors

Advertisement

Quick Links

Step #14: Repeat the previous steps to install the lower speaker adaptor for the
other side of the bike.
Step #15: Now is the best time to use zip ties to properly secure and "clean up" any
wiring. Its always a good idea to remove excess from the zip ties but cutting them
as close to flush as possible so there are no sharp edges!
Before re-installing outer fairing, turn front wheel to
each extreme side making sure any wiring is not
impeding the steering of the motorcycle.
Failure to do so can result in serious injury or death!
Warranty Information:
Wild Boar Audio LC LWR Adaptors are warranted against defects out of the box
only. Proof of purchase is required for all warranty claims. The warranty
applies to the original retail customer, and is not transferable. Please visit
www.wildboaraudio.com or www.hogtunes.com for more information or
to start a warranty claim. Products found to be defective during the
warranty period will be repaired or replaced (with a product deemed to be
equivalent) at Wild Boar Audio' sole discretion.
What Is Not Covered:
1) Any expense related to the removal/re-installation of adaptors.
2) Paint applied to any part, for any reason.
3) Damage from fasteners piercing through or being over tightened.
4) Repairs to these products performed by anyone other than Hogtunes.
5) Subsequent damage to any other components.
6) Any product purchased from a non-authorized dealer.
7) Damage to products due to an accident or collision.
8) Damage from use of Thread lock/Screw Glue materials of any kind.
IMPORTANT!
9) Damage to inbound warranty product due to improper packing.
The Adaptors In This Kit Will Accept Most Car
Audio 6.5" Speakers With A Mounting
Depth Not Exceeding 2.25" (58mm)
Rev 1.0

Advertisement

loading

Summary of Contents for Hogtunes Wild Boar Audio WBA LC LWR ADA

  • Page 1 2) Paint applied to any part, for any reason. 3) Damage from fasteners piercing through or being over tightened. 4) Repairs to these products performed by anyone other than Hogtunes. 5) Subsequent damage to any other components. 6) Any product purchased from a non-authorized dealer.
  • Page 2 Step #2: Remove the outer fairing/headlamp assembly. Refer to a service manual if from the main harness. If you are using a Wild Boar Audio or Hogtunes branded you need help with this. Note: A towel on the front fender can help prevent amp, follow the instruction is that manual for wiring.