Motorola MDM9000 Quick Reference Manual page 4

4
Requirements
• for modem connection:
telephone number, IP address and DNS/WINS address information from
•
the dial-in server administrator
a dial-in account on the host system, including a user ID and password
•
an RJ11 modem cable
•
a functioning telephone jack that supports plug-in modems connected to the
•
local telephone system
setup of Country Codes to use the modem with the appropriate country's
•
telephone network (refer to the mobile computer's Product Reference
Guide).
• for communication:
an MC9000 Series mobile computer
•
Cable Adapter Module (CAM), Symbol p/n ADP9000-100R
•
Serial Adapter Cable (for communication via cradle),
•
Symbol p/n 25-63856-01R
Microsoft ActiveSync
•
setup of host computer and mobile computer (refer to the mobile
•
computer's Product Reference Guide for detailed instructions).
Connecting the MDM9000 Modem
Connecting to the MC9000
To use the modem to provide data communication between the MC9000 and a
host computer remotely through a phone line:
Insert the CAM onto the MC9000.
1.
Connect the male 15-pin connector on the modem cable to the female 15-pin
2.
port on the CAM.
CAUTION
Connect one end of the phone cord to the Line In port on modem, and the
3.
other end to a wall phone jack.
Do not connect the modem's 15-pin connector into a VGA
port of a host computer.
MDM9000 Modem