Advertisement
6.6
To
set
the
parameters
6.6
To
set
the
parameters
In wired Wi-Fi mode, 3G Wi-Fi is equivalent to a wireless router, the Ethernet port works as WAN port, all
of the wireless terminals only connect to the Internet via Wi-Fi router.
Click the "Network Settings" → "WAN", choose the way to access the Internet according to the front-end
broadband lines, and the router supports three kinds of common wired Internet: static IP, dynamic IP,
PPPoE.
a) Static IP
If the network provider provides the way of static IP for your access to Internet, you need to enter the
IP address, subnet mask, gateway, DNS server, alternate DNS server provided by your ISP or
network administrator.
Static mode
IP address
Subnet Mask
Gateway
Primary DNS server
Alternate DNS server
b) Dynamic IP
If the network provider provides the way of dynamic IP for your access to Internet, you do not need to
make any settings here. Just click "OK". Dynamic IP is the method of accessing Internet commonly
used in hotels and restaurants and other public places.
DHCP mode
Network Name
c) PPPoE
If you access internet by "ADSL virtual dial-up" approach, you only need to type account information
provided by your ISP in the "User Name" and "Password" input boxes, and after that the setup is
of
wired
broadband
of
wired
broadband
OK
OK
- 14 -
Internet
access
Internet
access
Cancel
Cancel
Advertisement
