Advertisement
By default the system is in automatic recognition mode, plug and play, users do not need to do any
modification.
Normally, you only need to select "Auto Detect" (automatic identification) for "USB 3G Modem" Model on
the interface shown in the above figure, which can automatically set the dial number, APN user name and
password and other information.This way, you only need to connect 3G modem to the router's USB port,
and there's no need to do any setting before completing 3G dialing.
3G network connection settings
You can set the appropriate connection parameters
according to your local 3G network environment
3G model
USB 3G modem
Current status
Dial settings
Disconnected
Connected
Start
Permanent connection
dialing
If there's no traffic in specified minutes, then disconnect dialing
Dial-up parameters
(Default, Custom)
OK
Cancel
- 13 -
Advertisement
