Advertisement
Second row icons:
: Click on this icon to enter the setting interface for dynamic IP Internet. This will pop up at the
bottom of the page. If your current Internet environment is through a wired network cable (Hotel
Internet typically uses this method), then the IP address is assigned by the upper router. Please
click on the "OK" button to complete the setting; otherwise click "Cancel."
: Click on this icon to enter the setting interface for PPPOE dial-up. This will pop up at the bottom
of the page. If your current Internet environment is through a wired network cable or a telephone
line dial-up, then, please first enter the user name and password of the PPPOE dial-up, and
then click the "OK" button to complete the setting; otherwise click" Cancel."
: Click on this icon to enter the setting interface for static IP Internet. This will pop up at the bottom
of the page. If your current Internet environment is through a wired network cable and the IP
address is manually specified, then enter the addresses of IP address, subnet mask, gateway,
and DNS domain name in each column. Then click the "OK" button to complete the setting;
otherwise click "Cancel."
: Click on this icon to enter the setting interface for WiFi repeater mode. This will pop up at the
bottom of the page. Click "Search all AP", and then check the SSID you want to relay. Enter the
password and click OK.
6.4
To
modify
Wi-Fi
6.4
To
modify
Wi-Fi
WiFi router's factory-set password is relatively simple. When you first use this product, remember to
modify the WiFi password to ensure data security.
Modification method:
Click on "WiFi Security" icon, enter the setting page for WiFi security.
passwords
passwords
- 11 -
Advertisement
