Messages - Sony MHC-EC69 Operating Instructions Manual

To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use buttons on the unit to reset the unit
to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press , CD, and / at the same
time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.

GB

Messages

One of the following messages may
appear or flash in the front panel display
during operation.
CANNOT LOCK
The system cannot be locked after you
have done the procedure of "When
carrying this system. "
COMPLETE
The radio preset operation ended
normally.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected (page
40).
FULL
You tried to program more than 25 tracks
or files (steps).
LOCKED
The disc tray does not open. Contact
your nearest Sony dealer.