Selecting The Magnet Type - 493K K-METRON User Instructions

5.1 Selecting the Magnet Type.

To select the type of magnet to measure with, enter the Configuration Menu (Chapter 2.2)
and select "MAG TYPE"; then scroll through until the desired Magnet type and select using
the Orange Trigger. There are three types of Magnets to choose from:
The data for each of the magnets is calibrated via the "Calibrate" menu.
Magnet selection map, press X("Delete" for older version) button to cycle between the
three magnet types:
To SCROLL through the Menus, press X (or "Delete").
To SELECT a Menu item, press the ORANGE TRIGGER.
MAG TYPE
Sphere
Cube
10-30mm
12 | P a g e
K-METRON Radio User Instructions (Firmware 3.0.4; Doc v4.0)
Type of Magnet
• Sphere
• Cube
• 10-30mm
CONFIGURATION MENU
CALIBRATE
Confirm Recal
Measurement Range
0mm - 20mm
0mm - 20mm
10mm – 30mm
UNITS
Metric
Imperial
RADIO
Radio
ON
Radio
OFF